Theta Digital Casablanca III, Руководство пользователя

Страница: 105 / 130

Post Process
This sub menu, shown in figure 95, allows the user to select an additional process to add to the incoming signal once
it has already been processed/decoded via the selected
MODE . Only one post process can be selected per input.
The available post processing consists of:
OFF. Which applies no further processing;
Stereo Front/Rear ( ST/FR ), which takes signals from the front and
surround lefts, adds them together and outputs this sum equally to the
front left and surround left speakers. The same applies for the right
front and surround speakers. The process varies slightly, depending
on whether the
MODE is a matrix one, stereo or mono.
Figure 95 -
Video Display of the SETUP / INPUT Page 2 / POST PROCESS Sub Menu
Party , which takes parts of each original channel’s signal, blends them with all others and outputs this mix to all
speakers. In this way, each speaker will have a blend of all speakers.
Center Spread is a process in which the center speaker level is reduced and added to the front left/right speakers.
It is enabled in this Post Process sub menu, and altered in the SETUP / ACTIVE INPUT SETTINGS / page 3 sub
menu, under the CENTER SPREAD parameter.
Press
SETUP once to return to the SETUP / ACTIVE INPUT SETTINGS page 2 menu, or three times to return to the
main INPUT SELECT page.
Setup Input Page 3
This is the third page of the SETUP / ACTIVE INPUT SETTINGS menu.
It allows editing of the active input name via the MISC menu, setting a
master audio delay, setting a password for each INPUT SELECT
button, enabling/disabling Auto-Search and setting the Center Spread
parameter. All of these features are discussed below.
Figure 96 - Video Display of the SETUP / INPUT Page 3 Sub Menu
Setup Miscellaneous
Press button #
1 to enter the MISC sub menu.
Naming the Current Input Select button
Select the input to rename. Then press SETUP , ACTIVE INPUT SETTINGS , A-D twice, MISC and button # 1 to
name the currently selected input. The letters VFD or OSD will be displayed in the lower portion of the display. VFD
95