Thermsaver unvented water heater, Руководство по установке

Страница: 2 / 12

2
TECHNICAL DATA & INSTALLATION
INSTRUCTIONS FOR DIRECT &
INDIRECT UNVENTED WATER HEATERS
WITH EXTERNAL EXPANSION TANK
Your vessel is made by one of the worlds leading unvented water heater
manufacturers.
Your water heater is made from Duplex Stainless Steel, which is one
of the toughest and best grades of steel currently available.
Each unit has been individually tested and inspected to industry
standard.
Your water heater uses advances in technology and innovative
techniques to provide you with a high performance water heater at
the best price possible.
No other type of water heater can provide all of the benefits that
can be achieved from unvented units such as this model of
Unvented Water Heater .
IMPORTANT NOTICE FOR INSTALLATION
READ THESE INSTALLATION AND MAINTENANCE
INSTRUCTIONS BEFORE COMMENCING
UNVENTED CYLINDERS ARE DESIGNED TO BS STANDARD AND
INSTALLED TO RELEVANT BUILDING REGULATIONS
THE RELEVANT REGULATIONS ARE
ENGLAND & WALES – BUILDING REGULATION G3
SCOTLAND – TECHNICAL STANDARD P3
NORTHERN IRELAND – BUILDING REGULATION P5
AFTER INSTALLATION THE BENCHMARK LOG BOOK MUST BE
COMPLETED AND LEFT ALONG WITH THESE INSTRUCTIONS WITH
THE HOUSEHOLDER FOR FUTURE REFERENCE.
INSTALLATION INSTRUCTION MANUAL
TO BE LEFT WITH THE UNIT
CONTENTS
SPECIFIERS GUIDE
The law and unvented p3
The benefits of unvented systems p3
The benefits of unvented systems p3
Standard energy losses p4
What is supplied with your vessel ? p4
INSTALLATION INSTRUCTIONS
Siting the unit
p4
Check water pressure & flow rates p4
Connecting the water supply p5
Cold water valve p5
Drain tap p5
Pipework to taps p5
Secondary circulation p5
Wiring p7
Fitting immersion heaters p7
Fitting the thermal cut out & primary connections p7
Tundish p8
Commissioning the unit p8
External expansion tank p8
Scale p8
Draining p8
Discharge pipework p8
G3 Requirement p9
Problem solving p10
Spares p10
Part component references p10
Guarantee p11
DIAGRAMS
Dimensional data for DH / IDH
range of water heaters
p3
Typical installation of a DH tank p5
Typical installation of a IDH tank p5
Secondary circulation connection p6
2 x 2 port (S-plan) valve system p6
2 port valve + 3 port mid position valve (y-plan) p7
Immersion heater p7
Schematic discharge pipe arrangement p8