Printer setting and control
BA_TT5-L_GB_V(0).DOCX
page 23
6
Printer setting and control
6.1 Operation Panel
POWER Button
Press the POWER button to turn on the printer, and the START UP SCREEN appears. The printer is on “ready
to print” status, the LCD screen should display the message “READY“ on the screen. When printer is turned on,
hold and press down the POWER button for 3 second will turn the printer off.
FEED Button
When you press the FEED button, the printer will advance media until the FEED button is released. If you are
using continuous labels, pressing the FEED button will advance a length of media until the button is released. If
you are using media with gaps, pressing the FEED button once will advance only one label. If the label does not
stop at the correct position, you need to run the auto-detection function for your media, please see Section 3.4
Label Calibration and Self-Test.
PAUSE PRINTING_FEED Button
Pressing the FEED button during printing will interrupt printing, and the LCD display message “PAUSE...”. When
the FEED button is pressed again, the printer resumes printing. Example: While a 10-label print job is running,
you press the FEED button to pause the printer. Two of the labels have been printed. To resume printing and
print the remaining eight labels, you will need to press the FEED button again.
CANCEL PRINTING_FEED Button
Press and hold the FEED button for 3 seconds during printing, the current print job will be cancelled. Example:
While a 10-label print job is running, you press the FEED button. Two of the labels have been printed. The print
job is cancelled and the remaining eight labels will not be printed.
OPERATION TOUCH PANEL
POW ER
BUTTON
FEED
BUTTON
TOUCH PANEL
