pg. 16
6 . 4
6 . 4
6 . 4
6 . 4
6 . 4
HO
HO
HO
HO
HOW
W
W
W
W T
T
T
T
TO REPLA
O REPLA
O REPLA
O REPLA
O REPLACE
CE
CE
CE
CE THE O
THE O
THE O
THE O
THE OVEN LAMP
VEN LAMP
VEN LAMP
VEN LAMP
VEN LAMP
(ONL
(ONL
(ONL
(ONL
(ONLY MODELS F 25 - F 30 )
Y MODELS F 25 - F 30 )
Y MODELS F 25 - F 30 )
Y MODELS F 25 - F 30 )
Y MODELS F 25 - F 30 )
To replace the oven lamp firstly open the oven door. Use a screwdriver or round-tip
blunt knife to lever gently between the glass (V) and the oven back until the glass V
comes off its fastening hooks. Then remove the lamp L and replace it with a new one
type E 14 25 W 230-240 V 300°C. The lamp is not covered by warranty as it is a
consumable object.
6
6
6
6
6
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
6 . 1
6 . 1
6 . 1
6 . 1
6 . 1
GENERAL CLEANING
GENERAL CLEANING
GENERAL CLEANING
GENERAL CLEANING
GENERAL CLEANING
6 . 5
6 . 5
6 . 5
6 . 5
6 . 5
R E C O M M E N D
R E C O M M E N D
R E C O M M E N D
R E C O M M E N D
R E C O M M E N DA
A
A
A
AT I O N S
T I O N S
T I O N S
T I O N S
T I O N S
-Every time
you stoke the fire use the riddling tool to move the grate. Move the rod O indicated in para. 6.2. The air passage through the
firebox grate must always be unobstructed.
-Every 10 hours
of operation at least or whenever necessary clean the ash pans G and P as described in paragraph 6.2.
-
Every 2 weeks
or whenever necessary clean the internal surfaces of the heat exchanger, the oven and the door K under the oven.
-Always ensure
that the fuel fed into the firebox catches fire normally. Always ensure that this occurs to prevent dangerous explosions in
the firebox caused by the accumulation of unburnt gases. If these explosions prove to be rather violent the manufacturer declines all
responsibility for the mechanical resistance of the glass and heater parts.
-Adhere strictly to the declared consumption
: max. 8.5 Kg /hour for models 25 - F25 - 60 - 65 - 650 , max.10 Kg
/hour
for models 30 -
F30 - 90 - 95 - 920.
-
Thoroughly clean
the heater and smoke evacuation pipes at least twice each season .
THERMOROSSI SPA DECLINES ALL RESPONSIBILITY FOR DAMAGES TO THINGS AND/OR PERSONS CAUSED BY THE
FAILURE TO OBSERVE THESE INSTRUCTIONS.
Before commencing any operation disconnect the central heating cooker from the electrical power outlet. Your central heating cooker does
not require any special maintenance; simply adhere to the simple and basic but regular controls and general cleaning. This will guarantee
regular operation and optimal output at all times. As for all machines that run on solid fuel, the main enemy is undoubtedly the dirt generated
by ash, condensation, poor fuels; consequently it is important to clean the entire central heating cooker twice a year. The air inlets can be
cleaned with an ordinary vacuum cleaner.
However, we recommend having the flue outlet cleaned by a professional chimney sweep.
Caution: The glass and all the glazed steel parts must be cleaned with water and a gentle detergent when
the oven has cooled.
V
L
G
X
P
O
K
6 . 2
6 . 2
6 . 2
6 . 2
6 . 2
A S H
A S H
A S H
A S H
A S H
The central heating cookers are fitted with 2 ash pans placed under the firebox base. To access
the pans you need to open the enamelled door of your central heating cooker completely. To
collect the ash simply shift the grate riddling handle (O) (see drwg on right).
We recommend emptying the ash pans (G and P) on a regular basis to prevent them from filling up
completely. It is necessary to regularly clean under the oven by opening the plug K. and vacuuming
the ash deposits . To ensure that your central heating cooker performs efficiently it is advisable to
regularly clean the surfaces of the heat exchanger and of the smoke passages towards the
chimney, using the special equipment provided; to access them remove the cook top plates X as
illustrated in the drawing on the right. The tarry deposits reduce the exchange and consequently
the output as well.
6 . 3
6 . 3
6 . 3
6 . 3
6 . 3
CLEANING
CLEANING
CLEANING
CLEANING
CLEANING THE HO
THE HO
THE HO
THE HO
THE HOT PLA
T PLA
T PLA
T PLA
T PLATES
TES
TES
TES
TES
Clean the hot plates with a normal gentle detergent. After cleaning (for the models with non-vitrified hot plate), protect the
plate by applying a film of oil to keep it clean and shiny. As an alternative to the oil apply a thin film of protective chrome
paste (readily available from your local hardware store). Take care when applying the paste not to indelibly dirty the cast
iron side cornices. If you detect any rust use a lightly abrasive scouring pad to remove it and then proceed to apply the
protective oil or chrome paste.
