thermopatch.com
15
5.4 PrEss hEAD rOTATION sPEED ADjUsTmENT
by means of a screwdriver, periodically adjust the swinging
speed. it varies as a function of lubrication and wear of
mechanical parts.
•
clockwise to reduce
•
counterclockwise to increase
if the plate bounces before/after sealing, reduce the damping
(hex wrench)
•
clockwise to reduce
•
counterclockwise to increase
plATe SWiNg
l > r
Speed adjustment
screw
Damping
adjustment screw
Sensor
adjustment screw
Direction pilot lamp
if the automatic mode and the one plate mode are deactivat-
ed, the machine will run in normal mode.
push 3 times on Set up to go back to the main screen.
regulation of « the timer after pressing » : used only in auto-
matic mode:
push Set up --> (2 plATeS) --> ok -->
: push on ok, the time’s flashing, use the + or – touches
to modify it. push ok to validate the new entry.
push twice on Set up to go back to the main screen.
