thermopatch.com
13
v. Press setting
5.1 TEmPErATUrE sETTINgs / PrEssINg TImE
These parameters have to be programmed in the control
electronic card with the keyboard situated on the front
(the parameters will scroll on the display unit next to it).
a)
TemperATUre
SeTTiNg
• Press on “Temperature”,
• Press on “-” to decrease the indicated value,
or on “+” to increase it,
• Press on “OK” to validate your choice.
b)
Time
SeTTiNg
• Press on “Time”,
• Press on “-” to decrease the indicated value
or on “+” to increase it,
• Press “OK” to validate your choice.
5.2 PrEssUrE ADjUsTmENT
The jack pressure can be modified according to the
user’s need.
Use the pressure regulator situated on the filter, on left side.
The pressure will appear on the front manometer’s dial.
pull the regulator’s head upwards, then turn:
• clockwise to increase the pressure,
• anticlockwise to decrease the pressure.
5.3 bOArD PArAmETErs
press on “Set up” key to enter parameters, “+” to scroll
parameters, “ok” to enter in and validate, “Set up” to exit.
“Set up” > 2plATeAUX > program (T°+s) > resetable counter
> permanent counter > pre-heating > standby > code
PrEfErENCEs sET UP:
(
+
)
press + to scroll programs (p1 to p5)
press
, + or – to modify preheating time, ok
press + or – to modify time pressure, ok
press
to modify temperature, ok
NoTe: the selected program at start will be the edited one in
parameters. you need to enter in parameters to change and
keep the new program.
