6
THERM 90 KD.A
1.2.4 Simplified hydraulic diagram and functional diagram (is not source material for assembly)
THERM 90 KD.A
1 - Preparation of mixture
2 - Safety valve
3 - Circulation pump
4 - Flow switch
5 - Condensing body
6 - Emergency thermostat
7 - Thermal probe
8 - Pressure switch
9 - De-aerating valve*
In the case of gas odour:
- close the gas valve under the boiler
- ensure ventilation of the room (windows, door)
- do not manipulate the electric switch
- liquidate any naked flame
- immediately call service (the boiler must not be used until after the service inspection)
In the case of an odour of combustion burnt gases:
- disconnect the boiler
- ensure ventilation of the room (windows, door)
- call service (the boiler must not be used until after the service inspection)
In the case of a consumer appliance fire:
- close the gas valve under the consumer appliance
- disconnect the consumer appliance from the electricity network
- liquidate the fire with powder extinguishing equipment or a foam extinguisher
!
THERM boilers are fitted with all safety, emergency and protective elements to ensure completely safe boiler
operation. If irrespective of this, e.g. due to unprofessional intervention, irregular inspections and revisions of
the boiler, etc., there is a non-standard status then we recommend proceeding as follows:
1.3 Operational safety
1
2
3
4
5
6
7
8
7
9
HEATING WATER
OUTPUT
GAS
INPUT
HEATING WATER
INPUT
CONDENSATE
OUTPUT
