Issue Date: 22.01.2020
Page 15 / 15
Thermokon Sensortechnik GmbH, Platanenweg 1, 35756 Mittenaar, Deutschland · tel: 02778/6960-0 · fax: -400 ·
LCF02-Touch_3AO2DO_Datasheet_en.docx © 2020
0x1x = EC Fan Auto Mode, stage according control
variable 0x0204 & fan stage thresholds 0x124..129
513
0x0201
Read-write
setpoint temperature
0..500 = 0..+50,0 °C
0
514
0x0202
Read-write
Controller mode Comfort :
0b0000 0000=controller off
(Frost protection active)
0b0000 0001=controller auto mode
(heating&cooling)
0b0000 0010=controller heating mode only
0b0000 0011=controller cooling mode only
0b0000 0100=ventilating
(PI loop controls fan stages
only, valves closed)
1
Controller mode ECO:
0b0001 0000=controller off
(Frost protection active)
0b0001 0001=controller auto mode
(heating&cooling)
0b0001 0010=controller heating mode only
0b0001 0011=controller cooling mode only
0b0001 0100=ventilating
(PI loop controls fan stages
only, valves closed)
HMI mode
0b1xxx xxxx = HMI Mode, controller OFF
0b1xxx xx01 = show symbol "ventilating"
0b1xxx xx10 = show symbol "heating"
0b1xxx xx11 = show symbol "cooling"
0b1xxx x1xx = show symbol " AUTO mode"
0b1xxx x110 = show "AUTO + heating" symbol
0b1xxx x111 = show "AUTO + cooling" symbol
0b1xxx x101 = show "AUTO + ventilating" symbol
0b1xxx 1xxx = reserved
515
0x0203
Read-write
Active Symbols
0x00= show none
0x01= show Leaf
0x02= show dew point
0x04= show frost protect ON
0x08= show open window
0x10= show Attention!
0x20= show hourglass
0x40= show lock
0x80= show ECO
0
516
0x0204
Read-write
Control Variable Y% (HMI Mode)
0-100%
If output is 2-point, output will be ON for control
variable >5%
0.1
%
0
517
0x0205
Read-write
Room temperature on LCD (HMI Mode)
0..500 = 0..+50,0 °C
0.1
%
0
»
MOUNTING ADVICE/ DIMENSIONS (MM)
For installing or maintenance, please make sure the power is disconnected. Fix the thermostat base plate to the wall through the four screw holes
with distance between axes of 60 mm. Fasten base plate and front cover. Do not press the panel in order to protect LCD.
