ThermoFisher Scientific Wellwash 4, Руководство по обслуживанию

Страница: 65 / 156

Chapter 7: Maintenance
Thermo Scientific Wellwash
®
4 Mk 2 User Manual Rev.2.3, Cat. no. 1507340 41
6. Let the red-coded tube remain connected to the bottle cap and take the
bottle out, unscrew the liquid trap bottle cap and empty the bottle.
Fig. 7.5 Opening the liquid trap bottle
7. Close the bottle. Make sure the end of the red-coded tube is about 2 cm
deeper inside the bottle than the thin tube will be. Put the bottle back to its
place, but don't push it yet all the way down.
8. Insert the thin tube back through the liquid trap bottle cap so that the mark
on the tube (Fig. 7.4, item 1) is at the level of the cap.
9. Push the bottle all the way down. Push the thick vacuum tube as far as it
goes. Its end should now be approximately at the same level as the red-
coded tube's end.
10. Slide the cover back down and screw the black screw back on. You can pull
the red-coded tube slightly out to make sure the cover is tightly on.