Programming
Other heating programs
Set the
switch to the Clock position. Hold down the C button and select one of the four preset
programs or the personal 'E' user program by pressing the + button several times as required. The
program number is shown on the left of the display, and shows 'Sa, So' (= Saturday, Sunday) for
weekend programs
Mon ... Fri
Sat, Sun
Type
No. 1
06.00 ... 08.00
07.00 ... 09.00
Bath
19.00 ... 22.00
20.00 ... 23.00
room
No. 2
06.00 ... 08.00
08.00 ... 22.00
Children's
14.00 ... 22.00
room
No. 3
05.30 ... 07.30
07.00 ... 23.00
Employees
17.00 ... 23.00
No. 4
06.00 ... 23.00
06.00 ... 23.00
Standard
No. E
your personally created program
Creating an 'E' user program
Call up the 'E' user program (default setting: all bars short). Select the bar to be changed (now
flashing quickly) by pressing the + or - button. Change the bar by pressing the C button. The next bar
will then flash and can likewise be changed. In this way, all the bars can be switched from setback to
heating temperature and vice versa. The completed program will be automatically saved and
activated as a user program 10 seconds after the last actuation. It can be changed at any time if
required. On a weekday, the user program applies to all weekdays. If you wish to create an 'E' user
program for the weekend, hold down the + button and press the - button once. The user program is
now displayed for the weekend (default: all bars short), and 'Sa,So' appears on the left of the display.
Now create the user program for the weekends in the described manner. The program is saved 10
seconds after the last button actuation and the controller returns to weekday operation. (A personal
program for weekdays can likewise be created on weekends).