Thermocet Hi-Fire Ligero Скачать руководство пользователя страница 4

Page 4 

2. 

 

SAFETY DEVICE

 

 

The unit is fully safeguarded by means of thermo-electric pilot light protection to prevent unforeseen discharge 
of gas from the main burner 

 

2.1 Safety

 

 

Do not place ceramic burner decoration material or logs against the pilot burner. Ensure the pilot light is able to 
burn freely over the main burner. Good ignition of the main burner is only guaranteed if this is the case. Not 
adhering to these instructions can lead to dangerous situations. 
 

 

The unit, complete concentric flue system and flue terminal need to be cleaned and checked annually by a 
recognised gas technician/fitter, so the unit continues to operate safely. For additional instructions, see 
Chapter 3: Maintenance. 

 

If, for whatever reason, the pilot light extinguishes, you must wait 5 minutes before igniting the pilot light 
again. 

 

The unit may not be operated without the glass panel being in place.

  

 

 It is not permitted to place flammable materials on the ceramic wood inset.

 

 

 
The layout of the main burner with ceramic burner decoration material and wood inset may under no 
circumstances be changed or added to. 

 

 

Light flammable materials, such as nylon clothing or flammable liquids, may not be placed near the unit. 

 

Ensure children and other persons unaware of the operation of a gas unit, are supervised at all times when 
near the unit. 
 
Use a fireguard to protect against burns and protection of the children and persons named above.

 

 

 

 

Содержание Hi-Fire Ligero

































Отзывы: