7 Remote operation
Thermo Scientific
24
50108226_02.2007
Examples:
To turn on the stirrer:
Table 6 shows:STIRRER n
STIRRER n
ON: n =1n =1
Enter: STIRRER 1
To reduce the stirring power to 50 %:
Table 6 shows:
SETPOWER [power]
stirring power in %
Enter: SETPOWER 50
As soon as the control unit (5) senses a signal on the RS 232C interface (17), it will
automatically go into remote operation mode.
Terminate remote operation mode:
Disconnect the power supply unit (13) of the TELEMODUL 40 C from mains.
On reconnecting the power supply unit (13) you can once again operate the
TELEMODUL 40 C manually.
