4 Startup procedure
50108226_02.2007
11
Thermo Scientific
4 Startup procedure
4.1 Connecting the device
DANGER
Supply voltage and supply frequency must be within the range specified
for the control unit (3, 5). The control unit (3, 5) must only be connected
to a grounded socket.
DANGER
Magnetism.
Magnetic or metallic parts (e.g. data carriers, pacemakers, watches) can
be affected by magnetic fields.
Keep such parts away from the magnetic stirrer (2) and the magnetic
stirring bars.
CAUTION
The equipment must not be operated in hazardous locations.
CAUTION
Permissible ambient conditions:
Cf. Technical specifications.
Avoid extreme temperature changes.
The control unit (3, 5) must not be run in humid rooms, or set up in water
splash zones!
TELEMODUL control unit (3):
Turn the rotation speed control button (6) to position OFF.
Connect the control cable (4) of the stirring drive (2) to the output socket (7) of
the control unit (3). Tighten the knurled screw.
Plug the mains plug into a properly installed mains outlet.
If an absolutely germ-free environment is called for, the control unit (3) should
be located outside the sterile zone.
