4 Startup procedure
50108226_02.2007
13
Thermo Scientific
Telemodul 20 C
Telemodul 40 C
Benchtop distributor
Benchtop distributor
Number or
stirring drives
minimum /
maximum
1 outlet
four-way
eight-way
1 outlet
four-way
eight-way
MINI
2
/
4
2
/
8
2
/
4
2
/
8
MICRO
2
/
4
2
/
4
2
/
8
COMPACT
2
/
4
2
/
4
2
/
8
MAXI
2
/
4
= standard
= not permitted
= too weak
Table 1:
Possible connections of stirring drives (2) to control units
TELEMODUL 20 C or 40 C (5)
Connecting the single stirring system (standard version):
Connect the control cable (4) of the stirring drive (2) to the output socket (16)
of the control unit (5). Tighten the knurled screw.
Connect the mains plug (14) into the mains socket.
If an absolutely germ-free environment is called for, the control unit (5) should
be located outside the sterile zone.
Connecting the benchtop distributor:
4
Control cable
18 Magnetic stirrer outlet
Figure 5: Four-way (left) and eight-way (right) benchtop distributor
output sockets (18) of the benchtop distributor that are connected by a line
(see Figure 5).
Connect the mains plug (14) into the mains socket.
If Place the benchtop distributor behind the control unit (5).
Connect the control cable (4) of the benchtop distributor to the output socket
(16) of the control unit (5). Tighten the knurled screw.
Connect the control cable of the stirring drives (2), always in pairs, with the an
absolutely germ-free environment is called for, the control unit (5) should be
located outside the sterile zone.
18
4
18
4
