3
•
Installation
Page 12
Solvent Monitor
Installation Guide
5. Connect the other system modules using system interlink cables (see
images below).
The images below show the two possible system interlink
connection configurations. In the left image, the solvent monitor is
connected to the autosampler. In the right image, the solvent
monitor is connected to the detector.
Figure 5: System interlink connections (system shown from the right side and column
compartment shown from the rear)
No.
System interlink connection between
1
System base to pump
2
Pump to column compartment
3
Column compartment to detector
4
Detector to autosampler
5
Autosampler to solvent monitor
6
System base to pump
