Thermo Scientific PRO-LINE 60-30G, Руководство по эксплуатации и обслуживанию

Страница: 22 / 30

6. MAINTENANCE.
6.1 Warranty.
Thermo Ramsey warranty is given for a period of twelve mounths from the start
–up, but
no
longer than eighteen months from delvery, the good operation of the delivered devices.
Thermo Ramsey
’s obligation under warranty is conditioned upon the return of the defective
equipment within eight days from discovery, transportation charges prepaid to Thermo
Ramsey
’s workshop, with a detailed description of the defects.
Thermo
Ramsey
’s
obligation is relevant only to repairs and/or replacements that
Thermo Ramsey considers to be suitable for the good operation of the device according to
normal use and required as a conseguence of a fact of its own. If not specifically and
expressively defined with a written act, it will be excluded every obligation for
Thermo
Ramsey on repairs or replacements and/or othr service outside its workshop.
INFORMATIONS
It is excluded from any liability by the manufacturer for any reason, even indirectly
or damage to persons or property, due to a bad, inappropriate or negligent use of
the product, as well as inexperience and careless handling and / or maintenance of
the product.
6.2 Maintenance indications.
In general, the product does not require special maintenance, yet it recommends a
periodic functional check, as indicated below
Remains the sole responsibility of the user to determine the frequency of controls over
time, characterized as the environment and the place of 'installation of the equipment.
6.2.1 Belt Run-Off Switch Mod. 60-30G.
• Check gasket integrity
• Check operation of switches
• Check rotation roller lever
6.2.2 Rope Emergency Switch Mod. 60-31G.
• Check gasket integrity
• Check operation of switches
• Check the tension of the spring (170 mm standard length)
• Make sure the rope sling hook is perpendicular to the instrument
• Check the intervention of emergency, freeing up one side of the safety spring from
the fixed support; then repeat the test on the opposite side.
If a control does not yield positive results, analyze the following guidelines to
determine the cause of any anomalies.
- Incorrect adjustment of safety springs.
- Mechanical failure inside the instrument.
- Safety spring inefficient.
22 / 30
Cod.: PL-000603X-D002G