Thermo Scientific PRO-LINE 60-30G, Руководство по эксплуатации и обслуживанию

Страница: 16 / 30

d) Instal the helicoidal nuts (4) at a maximum distance of 3 meters apart along the
entire perimeter of the belt to be protected; Fixing can be done either by using the
chassis of the belt (shoulder) or through external frame still installed at the
perimeter of the belt.
Fig. 4-3-2-5
e) Take one end of the rope (5) , and wrap on the redance (2), in order to create a kind
of thin thread;
Fig. 4-3-2-6
f) Connect the two cables that were created together by clamps and tighten (3) ;
during this leave about 280-300 mm of rope free that will be used later to limit the
stretching of the safety spring
(1)
Fig. 4-3-2-5
g) Attach the redance, one of the two safety springs (1) Attach the redance, placed at
the ends of the belt.
16 / 30
Cod.: PL-000603X-D002G