Thermo Scientific PRO-LINE 60-30G, Руководство по эксплуатации и обслуживанию

Страница: 12 / 30

4.3 Positioning and Installation .
INFORMATIONS
The protective devices of the series PROLINE being relatively simple products , are
delivered ready for use , after proper installation. It is however advisable to carry
out the placement , installation and electrical connection to qualified personnel.
The equipment, mechanical and electrical , needed for placement and installation are as
follows :
• Spirit level
• Keys Traditional
• Common tools
• Multimeter
4.3.1 Belt Run-Off Switch Mod. 60-30G.
The Belt Run-off Switch is normally installed on both sides of the belt near the drum head
and tail. For belts of particular extension , there should be of flags even along the ribbon ,
each 200 meters about, and immediately after the loading points . The unit must be
installed at a distance from the belt such that the roller lever is angled 30 degrees when
the belt is in the position required for the block. In normal condition the belt should not
touch the roller lever.
Fig. 4-3-1
WARNING
The device should never be installed with the roller lever upside down, as
the weather and dirt can damage the bearings.
12 / 30 Cod.: PL-000603X-D002G