Thermo Scientific PRO-LINE 60-30G, Руководство по эксплуатации и обслуживанию

Страница: 18 / 30

DANGER
•
The tension of the rope along the equipment to be protected, must
be designed so that the rope is visibile.
•
In applications where the switch is installed in a central position to the
perimeter to be protected, tension must be adjusted so that in case of
breakage rope/ spring on one side the switch must be actuated by the
spring on the opposite side.
•
Any spillage of material from the transport device should not affect the
operation of the emergency stop rope.
•
Springs are elastic elements that allow an extension of up to 200 mm
(approximately 12 kg). Strictly follow the installation instructions, as by
lengthening the upper, are no longer guaranteed the characteristics of
elasticity, and then operating the device.
•
The length of the rope should not be above 25 meters per stroke.
4.3.3 Limit Switch Mod. 60-32G.
The Limit Switch must be positioned properly in order to detect any movement (horizontal
or vertical) of the equipment that must be checked.
4.4. Electrical Wirings
DANGER
•
Do not oper under voltage. !
•
The work on the devices can be performed only by qualified personnelI.
•
Be sure to disconnect power supply before performing any operation on the
devices.
18 / 30 Cod.: PL-000603X-D002G