Thermo Scientific PARTISOL 2000, Руководство по обслуживанию, Страница: 38 / 96

Service Manual, Partisol Model 2000 Air Sampler
S
ECTION
3: S
ERVICE
P
ROCEDURES
P
AGE
3-10
Revision B.000
Follow these steps to check the round battery:
1) From the Partisol Main screen, press <F5:Setup> to enter the
Setup screen (Figure 3-10).
2) Press <F1:Edit> to enter the Edit Mode.
3) Change the time or date to a new value and press <Enter>.
4) Turn off the instrument, wait approximately 20 seconds and turn
the power back on.
5) From the Partisol Main screen, press <F5:Setup> to enter the
Setup screen.
6) If the time or date is the same value as entered in step 3, the
battery is functioning properly. If the time or date shows a differ-
ent value than the value entered in step 3, the battery must be
replaced. Contact R&P.
7) Restore the time or date to the correct value.
3.1.6.2. T
ESTING THE
B
ATTERY
-B
ACKED
RAM S
OCKET
B
ATTERY
The battery-backed RAM socket battery has an approximate 2-1/2 year storage
capacity if the unit is unpowered and stored at temperatures between 0° and 40° C.
Figure 3-10. Setup screen.
Setup
Stations: 3 Std Temp: 25.0
Run Type: BASIC Std Pres: 1.000
Set Flow: 16.7 Ave Temp: 99.9
A/O Type: STAT Ave Pres: 9.999
Curr Date: 03-Dec-99 Basic Cyc: 0
Curr Time: 16:21:36 Intv Mode: SAMP
Edit Calib Diag RS232 Audit >
Soft Function Keys in View Data Mode
Edit Calib Diag RS232 Audit >
LCD + LCD - <
Soft Function Keys in Edit Mode
-- - + ++ Bksp >
+/- <
Unshifted
Shifted
Unshifted
Shifted