Thermo Scientific Orion Star
™
and Star Plus Meter User Guide
EN-50
Datalog Deletion Setting
The datalog deletion setting determines if the meter will automatically delete
the datalog after it is downloaded to a printer or computer and if the meter will
overwrite the datalog points when the datalog is full . If the datalog deletion setting
is set to
, the meter will automatically delete the datalog after the datalog
is downloaded to a printer or computer . The meter will also display the
error message when all 200 datalog points are filled and the datalog must be
downloaded to a printer or computer to clear the error message . If the datalog
deletion setting is set to
, the meter will overwrite the oldest datalog point
when all 200 datalog points are filled and will not delete the datalog after the
datalog is downloaded to a printer or computer .
1 . In the measurement mode, press
.
2 . Press
/
until
is displayed on top line .
3 . Press
to accept the selection and move the arrow icon to the middle line
and press
/
until
is displayed .
4 . Press
to accept the selection and move the arrow icon to the bottom line
and press
/
until
or
is displayed .
5 . Press
to accept the selection and move the arrow icon to the top line .
6 . Press
to save the setup option and return to measurement mode .
Note:
If the datalog is not required, set the datalog deletion setting to
to prevent the error 038 (datalog full) message.
Data Archival and Retrieval