EN-39
Thermo Scientific Orion Star
™
and Star Plus Meter User Guide
Chapter X
Conductivity Technique
Conductivity Setup Menu
Note:
Refer to the Conductivity Setup Menu section for the Setup Menu
Table, which contains a complete list of meter setup options and descriptions.
Refer to Appendix A for a description of the special setup menu features.
1 . In the measurement mode, press
.
2 . Press
/
to scroll through the setup menu until
is displayed
on the top line .
3 . Press
to accept the selection and move the arrow icon to the middle line .
4 . Press
/
to scroll through setup options:
for the temperature
compensation type,
for the temperature coefficient value used for
temperature compensation,
for the TDS factor value used for total
dissolved solids measurement,
for the nominal cell constant value of the
conductivity probe,
for the reference temperature used for temperature
compensation and
for the conductivity cell type .
5 . Press
to accept the selection and move the arrow icon to the bottom line .
6 . To scroll through a list of options on the bottom line, press
/
until the
desired option is displayed . To enter a numeric value for an option on the bottom
line, press
/
to adjust each digit and
to move to the next digit .
7 . Press
to accept the selection and move the arrow icon to the top line .
8 . Repeat steps 3 through 7 to change another conductivity setting or press
to return to the measurement mode .
