Thermo Scientific Nicolet iS50 GC-IR, Руководство пользователя

Страница: 19 / 36

1
iS50 ATR Module
Thermo Scientific iS50 ATR Module User Guide 17
The sample spectrum and its associated analysis results are stored in a virtual auto report.
If your workflow is set up to preview or print auto reports, the report is displayed or
printed using the default printer. Below is an example report showing an ATR spectrum
of a yellow sticky note taken with the iS50 ATR module, follow by the results from a
spectral search.
Figure 8. Auto report showing an ATR spectrum of a yellow sticky note taken with the
iS50 ATR module and the results from a spectral search
11. Raise the pressure arm and remove the sample.
12. Clean the sampling plate, crystal and pressure tip.
For cleaning instructions and recommended solvents, see “ Cleaning the Crystal .”
Measuring a Liquid Sample by ATR
Before You Begin
• Select appropriate liquid, paste or gel sample (we use isopropyl alcohol for this
experiment).
• Make sure the sampling plate is installed.
• Raise the pressure arm and move it to the resting position or install the liquid sampling
kit .
• Make sure the crystal is clean. For cleaning instructions and recommended solvents, see
“ Cleaning the Crystal .”