Thermo Scientific Heraeus Cryofuge 5500i, Инструкция по эксплуатации

Страница: 22 / 55

3
Control Panel
Control Panel
3-2 Cryofuge 5500i Thermo Scientific
Control Panel
The control panel contains the keys and displays of the centrifuge (only the power switch is located on
the right side of the device). All parameters can be selected and changed during operation.
Keys
The keys allow user intervention for controlling the operating mode as follows:
Acceleration curve
Braking Curve
Speed / RCF Value
Running Time
Temperature
PULSE
OPEN
START
STOP
Optional accessory
Program
Key Switch
Program selection
Program memory
Pre-warming or
Bucket Selection
Toggle key
Pre-cooling
Key Display contents
Start
Normal start of the centrifuge.
Stop
End run manually.
Open Door
Automatic release (possible only when device is switched on);
Emergency release
(see
“
Mechanical Emergency Door Release
”
on page 6-2
).
Pulse
By pressing the key the centrifuge starts immediately and accelerates
up to the end speed. Releasing the key initiates
,
a stopping process at
the highest braking curves.
UP
By pressing the key you change the value in the display.
Bucket
Use the key in order to have all available bucket types displayed in
succession.
Pre-Temp
By pressing the key you start the pre-temp function of the centrifuge.
Changing the
Display Mode
Use the key to change the display mode.
SAVE
Press the key to save a program.
By pressing the key up and down you change the value in the
display. If you hold the key pressed, the display changes continuously at
first slowly and after a few seconds at an accelerated pace to the higher or
lower values. By pressing the key briefly, you increase or decrease the
speed in one step. When pressing both arrows the cursor moves to the left.