Thermo Scientific Heraeus Cryofuge 5500i, Инструкция по эксплуатации

Страница: 19 / 55

2
Before Use
Mains Connection
Thermo Scientific Cryofuge 5500i 2-5
• The centrifuge should not be exposed to heat and strong sunlight.
• The set-up location must be well-ventilated at all times.
Mains Connection
Figure 2-1. Mains Connection
1.
Turn off the power supply switch located on right side (press
“
0
”
).
2.
Plug the centrifuge into grounded electrical sockets only.
3.
Check whether the cable complies with the safety standards of your country.
4.
Make sure that the voltage and frequency correspond to the figures on the rating plate.
5.
Establish the connection to the power supply with the connecting cable.
WARNING UV rays reduce the stability of plastics.
Do not subject the centrifuge, rotors and plastic accessories to direct sunlight.
Mains plug