Thermo Scientific Dionex ICS-5000, Руководство оператора

Страница: 360 / 482

Dionex ICS-5000 Operator’s Manual
344
Doc. 065342-06 12/11
5. Set the pump flow rate to 0.02 mL/min.
6. Set the EGC concentration to 50 mM and turn on the EGC and CR-TC
power.
7. Condition the EGC for 15 minutes.
8. Turn off the EGC and CR-TC power.
9. Turn off the pump flow.
10. Remove the backpressure tubing from the
EGC IN
line.
11. Use a high-pressure (blue) fitting to connect the
EGC IN
line to the EGC
INLET
port.
12. Disconnect the temporary tubing from the
ELUENT OUT
and
REGEN IN
ports of the CR-TC.
13. Reconnect the lines to the
ELUENT OUT
and
REGEN IN
ports of the CR-TC
that were disconnected in Step 2 .
To avoid damaging the suppressor, always turn it off before
conditioning the EGC. The pump flow is on during conditioning;
however, no flow reaches the suppressor.