Thermo Scientific Dionex ICS-5000, Руководство оператора

Страница: 182 / 482

Dionex ICS-5000 Operator’s Manual
166
Doc. 065342-06 12/11
4. If a suppressor is installed: Under Suppressor 1 (or Suppressor 2 ), select
the suppressor Type, set the Mode to On , and enter the Current required
for your application.
5. If a CD is installed: Click the CD tab to open the CD panel.
6. Under Cell Heater , set the Cell Heater Mode to On and enter the Cell
Heater Set Point .
4.12 Equilibrating the System and Verifying Operational
Readiness
NOTE
You can also use the Smart Startup feature in Chromeleon to
automate system startup and equilibration. Refer to the
Chromeleon Help for details.
1. On the Chromeleon 7 ePanel Set or Chromeleon 6.8 panel tabset, verify
that each device listed below (if installed in your system) is turned on and
the selected setting for the device (flow rate, eluent concentration,
temperature, and so on) is correct for your application:
•
Pump
•
EGC
•
CR-TC
•
EPM
•
Suppressor
•
Temperature control devices (DC compartment, DC column
compartment, IC Cube, CD cell heater, reaction coil heater)
2. Click Monitor Background on the toolbar above the Chromeleon 7
ePanel Set or on the Home panel of the Chromeleon 6.8 panel tabset.
Chromeleon begins plotting the detector signal and pump pressure
readings.
3. View the detector signal and monitor the background. Refer to the column
manual for the appropriate background for your application. The column
manuals are included on the Thermo Scientific Reference Library DVD
(P/N 053891).