Using the ACW for RCA Entry
Issue: 1.78
4-8 A Guide to Using DCS4 Access Control Workstation
Thermo Fisher Scientific
The Worker ID is entered either using the keypad or by using a
COTAG badge or by swiping a Security Badge through the bar-
code scanner on the ACW. These options are selected in the
System setup.
See A Guide to Using DCS4 Data Management
and Reporting Ref No. EPD/MHB/61066/000 for more
information.
The System Administrator can disable the keypad entry of the
Worker ID.
See A Guide to Using DCS4 System Administrator
Ref No. EPD/MHB/61065/000 for more information.
If the Display Dose on Issue option is enabled, the worker's
Dose Details will be displayed as follows:
The System
Administrator sets the
Hide PIN in the
Configuration
program (see A Guide
to Using DCS4 ACW
Manager Ref No.
EPD/MHB/61064/000)
.
Note that the picture above does not show the Worker’s PIN as
the Hide PIN is selected. If the Hide PIN is not selected, the
Worker’s PIN is displayed as follows:
Note: If the ACW is in On-Line Mode, the current Shift
Dose is displayed. If the ACW is in Local Mode, the Shift
Dose is blank.
Select the Enter button to move to the next window (or wait for
the automatic timeout).
Notes regarding Worker ID
input
Displaying the Dose
