Issue: 1.78
Using the ACW for Loading Tasks into the EPD
Thermo Fisher Scientific
A Guide to Using DCS4 Access Control Workstation 9-7
The System
Administrator sets a
Mailbox message in
the ACW Message tab
of the Tasks window
(see A Guide to Using
DCS4 Data
Management and
Reporting Ref No.
EPD/MHB/61066/000)
.
Note that the message above is a Task Information. If the
Lockout Worker is ticked in the ACW Message tab, the
following message is displayed:
In this case, the Entry Process will be terminated and the
worker shall not be allowed to re-enter the RCA until his entry
rights have been returned.
See A Guide to Using DCS4 Data Management and Reporting
Ref No. EPD/MHB/61066/000 for instructions on how to
restore a workers entry rights.
When the additional Task has been successfully loaded, the
following message is displayed indicating that the user may
proceed:
Note: If an Audio Card is fitted to the ACW then an audible
message of confirmation will also be given:
See A Guide to Using DCS4 ACW Manager Ref No.
EPD/MHB/61064/000 for further information about setting up
the audio messages.
Loading the Task into the
EPD
