Thermo Scientific CC58114PBC Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 68

background image

Operation - UT150 Controller
Programming Operation: Entering a Program

6-10

Thermo Scientific

setpoint value with arrow button then press and release the "SET/ENT" button
twice to enter this value and to advance to the "tM1" display. If the value for
"SP1" is correct and will not be changed, press and release the “SET/ENT”
button once to advance to the "tM1” display.

4. The next parameter, "tM1", represents the first time period for the unit to reach

the target temperature setpoint selected in "SP1".This selection can be a value
ranging from 0.00 to 99.59, which represents hours and minutes. Select this
time value with the arrow buttons and enter it by pressing and releasing the
"SET/ENT" button twice.

5. Press and release the "SET/ENT" button to advance to the next display of

"SP2", this is considered the dwell segment. Select the same target setpoint
temperature value as "SP1" with the arrow buttons. Press and release the
"SET/ENT" button twice to enter this value and to advance to next display.

6. The next parameter, "tM2", represents the second time period used to maintain

or dwell at the target setpoint selected in "SP2". This selection can be a value
ranging from 0.00 to 99.59, which represents hours and enter it by pressing
and releasing the "SET/ENT" button twice.

7. Next, "SP3" is the third setpoint value desires in the chamber. Select this target

temperature setpoint with the arrow buttons and press and release the
"SET/ENT" button twice to enter this value and release the "SET/ENT" button
twice to enter this value and advance to the "tM3" display. If this value is
correct and not changed, press and release the "SET/ENT" button once to
advance to the "tM3" display.

8. "tM3" represents the third time period for the unit to reach the target setpoint

selected in "SP3". This selection can be a value ranging from 0.00 to 99.59,
which represents hours and minutes. Select this value with the arrow buttons
and enter it by pressing and releasing the "SET/ENT" button.

9. The next parameter, "SP4" is considered the dwell segment. Select the same

target temperature as "SP3" with the arrow buttons, then press and release the
"SET/ENT" buttons twice to enter this new value and to advance to next
display.

Additional Program Parameters"

10. The next parameter, "SP4" is normally the dwell segment. Select the same

target temperature as "SP3" with the arrow buttons, then press and release the
"SET/ENT" button twice to enter this new value and to advance to next display.

This operation ends the offer use of setpoint and time parameters.

11. The next display shows "EV1" in the upper display. The lower value should

always be "0" (zero). Press and release the "SET/ENT" button once to go to
next display.

12. “AL1” should always have a lower value "9". Press and release the "SET/ENT"

button once to advance to the next display.

«
...
30
31
32
33
34
...
»

Содержание CC58114PBC





































































Отзывы:

Нет отзывов

Похожие инструкции для CC58114PBC

Бренд: Samson Страницы: 48

Бренд: Mako Networks Страницы: 15

Бренд: Samson Страницы: 78

Бренд: Rachio Страницы: 16

Бренд: Samson Страницы: 20

Бренд: HandyTrac Страницы: 14

Бренд: TA Страницы: 6

Бренд: Jedia Страницы: 12

Бренд: JED Micro Страницы: 10

Бренд: JCM Technologies Страницы: 2

Бренд: Talgil Страницы: 14

Бренд: Tadao Страницы: 2

Бренд: Vanderbilt Страницы: 2

Бренд: Eaton Страницы: 10

Бренд: Idemia Страницы: 29

TVNext NN01-054

Бренд: Fractus Antennas Страницы: 14

Бренд: Rational Страницы: 140

Бренд: Festo Страницы: 87

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды