Tools and Equipment required for installation:
½ inch drill with drill bits for appropriate wall anchor
Four ¼ inch diameter bolts – 1.5 inches long
Four ¼ inch flat washers
Adjustable wrench
¼ inch tubing
Pressure / flow regulating valve
Shut-off valve
Standard screw driver
Panel Mounting Instructions:
1.
Place the 12 inch x 12 inch pane on the wall where it is to be mounted and mark the placement
of the upper left hole.
2.
Drill a mounting hole for the upper left corner with a masonry drill bit and install a wall anchor.
3.
Mount the AquaTrace panel with the upper left mounting bolt.
4.
Using a level, rotate the panel until the top edge is level, then mark the remaining three
mounting holes.
5.
Rotate the AquaTrace panel out of the way, drill the three mounting holes and install wall
anchors.
6.
Secure the panel with all four bolts and washers and tighten.
Thermo Scientific AquaSensors
™
AquaTrace
™
Trace DO System User Guide
11
