Thermo Scientific AquaPro Analyzer User Guide
45
5.2
Calibration Log
The calibration log will list calibration events for all sensors configured with date/time, calibration type,
temperature reading, calibration results (pass/fail) as well as slope and offset data where appropriate.
Calibrations must be performed in the primary measurement unit for the parameter. If there is another unit
selected, the calibration will revert to the primary measurement.
If only a default calibration is present, the Cal ID:0 will be in the top left corner of the screen and there will be not
time/date stamp. The yellow channel number can be improved with a successful calibration of the sensor.
5.3
Event Log
The event log will list all events over a period of time, from the most current to the oldest, including relay
switching, data log downloads, channel setting changes, system setting changes and channel status changes
such as temperature failure.
5.4
Analog Output Status
This function provides a single screen to display out current output readings from all channels in one place.
5.5
Relay Status
This function provides a single screen to display current state of all configured relays.
