Section 1 Important Information
Ignoring the following warnings could
cause serious injuries or even fatal
accidents.
Check the voltage, phase and capacity of
power supply on the ID plate before
installation. Connect properly.
Power supply must be properly
grounded. Abnormal grounded
connection causes serious damage.
Grounded connection must not be on the
water pipe and gas pipe.
Use provided power cord. Power cord:
Wall outlet with grounded terminal
power cord 250V 10A
Do not install the product in a place that
gas could leak. Do not use in a place that
has industrial oil smoke or metallic dust.
It causes fire or electric shock. Do not
use the machine near to places where
explosion could happen due to organic
evaporating gases.
Explosive materials: acid, esther, nitro
compound.
Inflammable materials: salt peroxides,
inorganic peroxide, salt acids.
Check equipment for permissible
environmental conditions when using
inside of Temperature and Humidity
Chamber or Incubator. It can be the
cause of fire or trouble by stirrer
electricity, electronic, and damage of
motor.
Rocker’s permissible environmental
condition. Temperature 5°C to 40°C,
Maximum relative humidity 80%.
Unplug if there is a strange sound, smell
and/or smoke from the product. Stop
operating and request the service.
Keep out of the direct sunlight. It may
influence product life and proper
operation.
Do not use the machine at places where
moisture is high and flooding can
happen.
Changes to the product could result in
product inefficiency. Also this will void
warranty. Which also indicates a
hazardous situation, if not avoided may
result in minor or moderate injury.
Do not put heavy things on the power
cord. Do not put the machine on the
cord. It may take off the wire coating and
cause electric shock or fire.
Do not touch it with wet hands and place
the main plug correctly. It could cause
the electric shock or injuries.
Installing power outlet near instrument
may be convenient. Allow adequate
spacing around the product to ensure
proper ventilation, accessibility to the
power switch and for allowing the
instrument to run without impediment.
Do not install the stirrer near machinery
generating high frequency noise. Avoid
installation close to high frequency-
welding machine, sewing machine, or
mass SCR controller.
Do not inject any liquid and inflammable
things inside of product.
Do not pour water or put liquid on the
top of the product when cleaning.
Disconnect the main power immediately
and request the service if water may be
in the product.
Do not let the product take any strong
shock or vibration. It could cause
abnormal operation or trouble. It may
deteriorate the ability of the product
operation and not obtain correct results.
Do not sprinkle insecticide or flammable
spray on the product. Use smooth
cloths. Cleaning with solvent can cause
fire and deformity.
Power off while product cleaning. It may
cause electric shock or fire.
Do not drop or allow the machine to fall.
It will cause wrong operation and
malfunction.
Only accessories that meet the
manufacturer's specifications shall be
used.
Disposing of Product
Dispose of the unit by separating the
plastic, motor and electronics and
dispose according to local laws and
regulations.
Welcome to Thermo Scientific Digital
Platform Rocker. This Digital Platform
Rocker is applicable to various mixing
operations in different areas, including
hybridization, blotting and staining, or
distaining gels. To avoid accident during
operation, please use rubber bands to
fasten containers onto the tray.
This product is intended to be used in a
laboratory setting and is not to be used
in a clinical setting.
2.1 Feature
◆
It has left and right reciprocating working
mode.
◆
Provides 1~15
°
adjustable angle range.
◆
It has
speed
adjustment, continuous
operation and timing function.
◆
It has
speed
/
angle
adjustment
display
function.
◆
It
uses a knob to achieve stepless speed
regulation.
◆
It
uses
step-motor, with
accurate
speed
control, stability, safe
and
reliable
features.
◆
It has
a
power recovery function
.
◆
The
housing
material
is
ABS,
which
has
excellent
heat
resistance,
corrosion
resistance,
impact
resistance
and
chemical
resistance.
◆
Provide large size tray and rubber strips
to meet customer needs.
1 Section 1 | Important Information
Digital Platform Rocker 2
Section 2 Introduction
