Section 4 Overview
4.1 Specifications
Speed Range..................................................................1~70rpm
Display Accuracy..................................................................1rpm
Speed Accuracy.................
±
1rpm
≤
50rpm, ±2rpm
＞
50rpm
Rocking Mode..........................Left right reciprocating motion
Angle Range........................................................................1°~24°
Angle Accuracy...............………................................…………...……±1°
Maximum Load (Centered on tray)......................8kg@
≤
±12°
@
≤
40rpm
Timing Range…………………........0 (Continuous) / 1s - 9999 min
Overall Dimensions........................................390×292×206mm
Tray Dimensions...............................................322×282×19mm
Packaging Dimensions.................................487×387×354mm
Net Weight.............................................................11.5Kg(25.3lb)
Gross Weight.........................................................13.5Kg(29.8lb)
Input Requirement....................100-240VAC~, 50/60Hz, 0.1A
Output Requirement.................................................24V , 2.5A
Certificate.................................RoHS, WEEE, cCSAus, CE Mark
Application Environmental Conditions: Indoor use
Temperature....................................................................5 to 40
℃
Voltage Fluctuation.....................±10% of the nominal voltage
Altitude...........................................................................
≤
2,000 m
Humidity...................................................................... 20% to 85%
Storage Environmental Conditions
Temperature....................................................................0 to 60
℃
Humidity.......................................20% to 90%, non-condensing
4.2 Environmental Conditions
4.3 Safety Instructions
Rotation Speed
Rocking Angle
Load
Time
Size
Weight
Power Supply
Others
Please read the entire instruction manual
before operating the Digital Platform
Rocker.
WARNING DO NOT
use the Digital
Platform Rocker in a hazardous
atmosphere or with hazardous
materials for which the unit was not
designed. Also, the user should be
aware that the protection provided by
the equipment may be impaired if
accessories used are no provided or
recommended by the manufacturer,
or are used in a manner not specified
by the manufacturer.
CAUTION !
To avoid electrical shock,
completely cut off power to the unit
by disconnecting the power cord
from the unit or unplug from the wall
outlet. Disconnect unit from the
power supply prior to maintenance
and service. Any spills should be
removed promptly. Bio hazard spills
should be cleaned using approved
liquid promptly. Solvent spills are a
fire hazard.
Stop the unit immediately, and DO
NOT operate until clean up is
complete and vapors have
dissipated.
DO NOT
immerse the unit for
cleaning.
DO NOT
operate the unit if it shows
signs of electrical or mechanical
damage.
Position of Loads
Place the loads in the recommended
positions below:
1. Place load at the center of the tray.
2. Place loads symmetrically around the
center of the tray.
3. Make sure to use rubber strips to
fasten containers onto the tray.
Symmetrical placement
5 Section 4 | Overview
Asymmetrical placement
Digital Platform Rocker 6
