Thermo King 088669, Руководство пользователя

Страница: 117 / 136

Mechanical Diagnosis (Rev. 04/03)
103
Engine cranks but FAILS to start
(continued) Electric fuel pump not operating Check pump for running and 8 to 10
psig (55 to 69 kPa). Repair or
replace fuel pump
Injection pump incorrectly timed Adjust timing
Faulty injeciton nozzle(s) Repair injection nozzle or replace it
Faulty injection pump Have pump repaired
Engine stops after starting Air in injection pump Bleed fuel system
Fuel filter obstructed Replace filter element
High water temperature coolant Add coolant. Check for leaks
Low oil pressure Add oil. Check for leaks
Vent of fuel tank obstructed Remove obstruction
Electric fuel pump not operating Check pump for running and 8 to 10
psig (55 to 69 kPa). Repair or
replace fuel pump
Dry air cleaner (optional) plugged Change filter element
Fuel solenoid not energized Check run circuit
High refrigerant pressure Locate and correct cause
Engine does not reach full power Air or dirt in fuel system Adjust
Fuel line leaks Tighten connections of fuel lines. if
necessary, replace damaged lines
Speed adjustment wrong Adjust speed
Electric fuel pump does not run Check voltage. Repair or replace
pump
Fuel filter blocked Install new filter
Electric fuel pump filter dirty Clean and replace diesel filter
Delivery of fuel pump insufficient Repair or replace pump
Cylinder head gasket leaking Replace gasket
Piston rings worn, stuck or broken Replace rings
Cylinder worn Replace or bore
CONDITION POSSIBLE CAUSE REMEDY