Thermo Electron 3-Star Conductivity Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 111

Thermo Electron 3-Star Conductivity Скачать руководство пользователя страница 36

Thermo Electron Corporation

IV-4

Orion Star Series Meter

pH

When the pH icon stops ﬂashing

1. Press MEASURE key to accept the Autobuffer recognition temperature-corrected

value for the buffer and return to measurement mode.

a. Before returning to measurement mode the slope will be displayed. SLP appears

in the lower field while the actual electrode slope, in percent, appears in the
main field.

b. For a 2 or more point calibration it will automatically proceed to measurement

mode after 3 seconds.  If only a 1 point calibration was performed then the
slope will be displayed and flash to allow you to edit the slope.  After editing the
slope press the MEASURE key to proceed to measurement.  The probe icon
is displayed above the main field. then press the MEASURE key to proceed to
measurement mode.

2. Press the CALIBRATE key to accept Autobuffer recognition as the 1st calibration

point & start the 2nd calibration point when prompted for the next buffer.

3. Use the UP & DOWN arrow keys and the DIGIT/DECIMAL keys to edit the value

for a manual buffer entry. Then follow step 1 or 2.

4. Continue measuring for each calibration point, rinsing the electrode between

each buffer until the desired calibration points are reached. Press MEASURE key
to escape from the calibration mode and start sample readings.

After calibration, the electrode and meter are ready to start taking sample
measurements.  Make sure that the instrument is in measurement mode and that
the pH icon is lit.  If the probe icon is not lit press the MEASURE key to return to
measurement mode.  If the pH icon is not lit, press the RIGHT ARROW key until the
arrow on the left of the display is pointing at the top line.  Then press the UP arrow
key until the pH icon lights.  You are now ready to start measuring.

«
...
34
35
36
37
38
...
»

Содержание 3-Star Conductivity
















































































































Отзывы:

Нет отзывов