VOLTMAX ELECTRIC BOILER Installation and Operation Manual
(
Revised March 2019)
, Page
30.
Parameters
Description
Language
Select English or French
version
Temperature
unit
Select the temperature units,
either
Celsius
(C)
or
Fahrenheit (F)
Flow unit
Select the flow unit, either US
gallons per minute (USgpm)
or liters per second (L / sec)
Backlight
Setting the backlight mode:
-
Off
-
30 secondes
-
Always On
Internal
buzzer
ON/OFF setting of the
internal buzzer
CLOCK SETTING
Internal clock configuration
Use this menu to adjust the
controller’s internal
clock. To set the clock correctly, you must adjust
the time, minutes, and date.
This adjustment is necessary in order for these
modes to function properly:
-
The boiler’s power consumption
-
Limiting the boiler’s power capacity according to
a schedule
-
The boiler’s occupation mode
Battery life for the clock is at least 1 year when
the controller is unpowered (at 25°C). When the
battery is low an indicator will appear on the
screen. The battery shall be replaced to keep to
clock active. Following a battery replacement, the
internal clock must be reprogrammed to remove
the indicator on the bottom of the screen.
CONSUMPTION
Boiler consumption cycle report
This menu allows visualization of the boiler power
consumption report. First, you must activate the
beginning of the consumption cycle with the
Start
key. The consumption report can be saved using
the
Save
key. And all saved report is available on
the
History
tab. The beginning of the
consumption cycles can be reset using the
Reset
button.
The controller records up to 30 consumption
report.
N.B
The consumption values are approximate
and should not be used as a comparison with
actual consumption data charged by the
electricity distributor.
BOILER SETTINGS
In order to be able to configure the boiler, it is
necessary to authenticate yourself with an
installer or manufacturer code.
The default "Installer" access code is
1111
and can be changed in the
Change password
menu.