thermital 20105840, Руководство по установке и обслуживанию

Страница: 29 / 60

29
ENGLISH
INSTALLER
All the boiler’s internal electrical connections have been
pre-wired and tested in the factory.
Only the following connections are needed for installa-
tion:
- Connect the boiler to the mains power supply (single
phase 230V-50Hz) using the cable (1) from the rear of
the appliance.
- Connect up the room thermostat (TA), outdoor tempera-
ture sensor (SE) and solar collector temperature sensor
(SColl).
OUTDOOR TEMPERATURE SENSOR (SE) AND
ROOM THERMOSTAT (TA)
- Remove the front panels by pulling them forwards.
- Remove the two screws (A) and tilt the control panel (B)
downwards.
1
20
40 60 80
100
4
3 2 1
0
0 120
B
A
ELECTRICAL CONNECTIONS