Thermion BRIDGEMASTER, Руководство пользователя

Страница: 13 / 59

xiii
Table of Contents,
continued
Page Section Contents
14 6 Principles of Operation
6.1. Operating Parameters
6.2.
Air Nozzle Alignment 3/16” (4.8 mm) Wire Head
6.2.1.
Angle Spray Nozzle 3/16” (4.8 mm) Wire Head
6.3.
Air Nozzle Alignment <= 1/8” (3.2 mm) Wire Head
6.3.1.
Angle Spray Nozzle <= 1/8” (3.2 mm) Wire Head
6.4. Maintenance
6.4.1. Spray Head/Parts Maintenance
6.4.2. Combination Leads
6.4.3. Feeder Unit
6.4.4. Control Cables
22 6.5 Maintenance Schedule
6.5.1 Constant Operations Checks
6.5.2 Daily Maintenance (8 hours)
6.5.3 Weekly Maintenance (40 hours)
6.5.4 Monthly Maintenance (160 hours)
24 7 Liner Replacement
7.1 Installation/Replacing Small Wire Liners
26 8 Parts Required for Various Wire Sizes
27 9 Components Section
9.1 Cable Components
9.2 Feeder Components
9.2.1 Wire Drive Components
9.2.2 Motor Components
9.2.3 Industrial Cart Assembly
9.3 Front End Assembly
9.3.1
Lead Components 3/16” Wire
9.3.1.1
Lead Components 1/8” (3.2 mm) Wire
9.3.1.2
Lead Components 3/32” & Smaller Wire
9.3.2
Spray Head Components 3/16” (4.8 mm) Wire
9.3.2.1
Spray Head Components<= 1/8” (3.2 mm) Wire
9.3.2.2
Angle Spray Head Components 3/16” (4.8 mm) Wire
9.3.2.3
Angle Spray Head Components<= 1/8” (3.2 mm) Wire
9.3.3 Handle and Trigger Assembly
9.4 Control Box
9.4.1 System Wiring
9.5 GENERAL TROUBLESHOOTING