Thermion BRIDGEMASTER, Руководство пользователя

Страница: 4 / 59

iv
US Standards In-Preparation
ANSI/AWS A5.33/A5.33M:199X, Specification for Solid and Composite Wires, and
Ceramic Rods for Thermal Spraying, 01/19/99 (ballot to publish).
This specification defines the as manufactured, chemical composition classification
requirements for solid and composite wires and ceramic rods for thermal spraying.
Requirements for standard sizes, marking, manufacturing, and packaging are
included.
ANSI/AWS C2.16A, Guide for Thermal-Sprayer Qualification , WD #2, March 5, 1999.
This standard contains the thermal sprayer (operator) performance qualification
tests for thermal sprayers. Qualification tests are included for job knowledge, flame
spraying, arc spraying, plasma spraying, and high velocity oxygen fuel (HVOF)
spraying.
ANSI/AWS C2.18A-XX/SSPC CS 23.00A-XX/NACE TPC #XA, Guide for the Application
of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys &
Composites for the Corrosion Protection of Steel, WD-2, February 25, 1999.
This standard is a procedure for the application of metallic thermal spray coatings (TSC) of
aluminum, zinc, and their alloys and composites for the corrosion protection of steel.
Required equipment, application procedures, and in-process quality control (QC)
checkpoints are specified.
ANSI/AWS C2.18B-XX/SSPC CS 23.00B-XX/NACE TPC #XB, Specification for the
Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their
Alloys & Composites for the Corrosion Protection of Steel, WD-2, February 25, 1999.
This standard is a specification for the application of thermal spray coating (TSC)
systems for the corrosion protection specifies procedures for surface preparation
and the application of the TSC with in-process quality control (QC) check points.
Annexes provide amplifying information which include safety, job reference
standards and job control record, selection of TSC’s, TSC operator and inspector
qualification, inspection, material and equipment, and maintenance and repair of
TSC’s. This standard may be used as a procurement document.
ANSI/AWS C2.19-XX,
Machine Element Repair with Thermal-Spray Coatings , in
preparation.
This standard covers thermal-spray processes for machinery element repair of ferrous and
non-ferrous substrates. Included are requirements for the qualification of thermal spray
procedures and operators, requirements and guidance for use of thermal spray material
and equipment, quality assurance requirements, and descriptions of applicable
qualification tests. Note: NAVSEA (Charles Null) requested AWS incorporate MIL-STD-
1687A(SH) into an AWS standard, April 1998.