Thermasis HYDRA 12, Инструкция по установке и эксплуатации

Страница: 10 / 41

MINIMUM DISTANCES
Room ventilation can only be set towards the rear wall if there is adequate insulated
ducting of the hot air flow.
If particularly delicate objects are present, such as furniture, curtains or sofas the distance of the
product must be significantly increased.
If the floor is made of wood, it is recommended to place a floor protection in accordance
with the Standards in force in the country of installation.
Heat-sensitive or flammable objects cannot be placed near the product. Keep such
objects at a minimum distance of 80 cm from the outermost point of the product.
CONNECTION OF THE SMOKE EXHAUST DUCT
When making the hole for the passage of the smoke
discharge pipe, one must take into account the
possible presence of flammable materials. If the hole
must be made through a wooden wall or
thermolabile material, the INSTALLER MUST first of
all use the appropriate wall fitting (minimum
diameter 13 cm) and suitably insulate the pipe of the
product that passes through it using adequate
insulating materials (1.3 - 5 cm thick with minimum
thermal conductivity 0.07 W/m°K).
The same minimum distance must be applied if the
pipe of the product must pass through vertical or
horizontal sections near the thermolabile wall. It is
recommended to use an insulated double-wall pipe in
external sections in order to prevent condensation
from forming.
The combustion chamber works in negative pressure.
REAR VIEW OF A PELLET STOVE
1) SMOKE OUTLET
2) COMBUSTION AIR INLET
Always use pipes and fittings with appropriate seals that guarantee tightness.
REFERENCES FLAMMABLE OBJECTS NON-FLAMMABLE
A 200 mm 100 mm
B 200 mm 100 mm