background image

 
 
  

Attach Side Curtains 

______________________________________________ 

 
1. 

Locate provided bag of screws 

2. 

Insert top and bottom of right-hand curtain housing in 
top and bottom curtain guides on air-conditioner 
cabinet. 

950-0077-revD                                                                        Page 7 of 16                                                                       9 May 2007 

 

Back View 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Bottom View 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

3. 

Extend right-hand curtain outward so you may insert 
the first screw through the middle hole of the curtain. 
Using a #10 x ¼” pan-head Phillips screw, screw 
curtain to middle hole in air conditioner cabinet. 

 

NOTE: 

This screw is required to correctly attach 

curtain (top to bottom) to the air conditioner cabinet. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

4. 

While the right-hand curtain is still extended, insert a  
#10 x ¼” pan-head Phillips screw into the top and 
bottom sides of the curtain. Screw curtain to the top 
and bottom holes in the air conditioner cabinet. 
 

NOTE: 

Some curtains may have 2 slots at each end. 

You will be able to see a mounting hole through the 
correct slot. 

 

5. 

Slide curtain housing into guides as far as it will go. 

6. 

Repeat above steps for left-hand curtain. 

 
 

 

Attach Foam Adhesive Seal 
_______________________________________________________ 

 
Attach foam adhesive seal along the bottom of the curtain bottom 
channel. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Install Cabinet into Window 
_______________________________________________________ 
 

 

Handle air conditioner gently 

 

 

Be sure your air conditioner cabinet does not fall out of the 
opening during installation or removal. 

 

 

 

The location where the power cord exits the air conditioner 
should be no more than 4 ft (122 cm) from a grounded 3 
prong outlet. 

 

 

Do not block the louvers on the front panel. 

 
 

 

Do not block the louvers on the outside of the air 
conditioner. 

 
1. 

Center empty cabinet in window. Check that lower rail of 
air conditioner cabinet is behind and against back side of 
windowsill. Maintain a firm hold on the air conditioner 
cabinet. Lower window sash to hold cabinet in place. 

 
2. 

Measure the distance between the right-hand side of the 
cabinet and the inside of the window channel. 

 

 
3. 

Repeat for the left side. Adjust the cabinet until the 
distance on each side is the same. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание 420-0011

















Отзывы: