______________________________________________________
TEMPERATURE
_______________________________________________________
Press the plus button to raise the temperature. Display shows the
temperature control setting. Each time you press or hold the plus
button, the temperature will increase 1ºF until it reaches 86ºF (30ºC).
950-0077-revD Page 11 of 16 9 May 2007
NOTE:
After 3 seconds, the display will show the current room
temperature.
Press the minus button to lower the temperature. The display shows
the temperature setting. Each time you press or hold the minus
button, the temperature will decrease 1º until it reaches 64ºF (18ºC).
NOTE:
After 3 seconds, the display will show the current room
temperature.
To change the temperature display from ºF to ºC:
1. Turn off the air conditioner.
2. While the air conditioner is off, press and hold down the MODE
and FAN SPEED buttons while pressing POWER to turn on the air
conditioner.
NOTE:
Follow these same steps to change the temperature display
from ºC to ºF.
_______________________________________________________
Timer delay
_______________________________________________________
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1. Press TIMER. Timer indicator light will flash. Display will show
remaining hours before air conditioner will turn off.
2. Press the plus or minus button to adjust the delay time (1 to 24
hours).
3. Press TIMER again or wait 10 seconds. Timer indicator light will
remain on. Display will show the current room temperature.
To set the Timer to turn on the air conditioner, keeping previous
settings:
1. Turn off air conditioner.
2. Press TIMER. Timer indicator light will flash. Display will show
remaining hours before air conditioner will turn on.
3. Press the plus or minus button to change delay time (1 to 24
hours).
4. Press TIMER again or wait 10 seconds. Timer indicator light will
remain on. Display will show current room temperature.
To set the timer to turn on the air conditioner, changing the
previous settings:
1. Turn on air conditioner.
2. Adjust Mode to Cool, Fan Only, or Power Saver.
3. Adjust Fan Speed to Turbo, High, Low, or Auto.
4. Adjust temperature between 64ºF (18ºC) and 86ºF (30ºC).
5. Wait 3 seconds before turning off air conditioner.
6. Press TIMER. Timer indicator light will flash. Display will show
remaining hours before air conditioner will turn on.
7. Press the plus or minus button to change delay time (1 to 24
hours).
8. Press TIMER again or wait 10 seconds. Timer indicator light will
remain on. Display will show current room temperature.
To clear Timer Delay program:
Note:
Air conditioner can be either off or on.
Press and hold timer for 3 seconds. Timer indicator light will shut off.
To see or change the remaining time (in hours):
1. Press TIMER once after it has been programmed. Display will
show remaining time.
2. While the display is showing the remaining time, you can press the
plus or minus button to increase or decrease the time.
3. After 10 seconds, display will show the current room temperature.
_______________________________________________________
To operate air conditioner with remote control
_______________________________________________________
NOTE:
Remote control may vary in appearance.
NOTE:
Two AAA batteries (included) power the remote control.
Replace the batteries after 6 months of use, or when the
remote control starts to loose power.
The remote operates ranging from 64-86 ºF.
