Thermal Arc Viking 210GM, Руководство по эксплуатации

Страница: 18 / 42

Viking 210GM, 250GM
13
3.5 Optional Accessories
Catalogue
Number
Description Viking 210GM Viking 250GM
GM RGM GM RGM
10-6197 Digital Meter Kit
10-6105 250A Eliminator torch (fits Viking adaptor)
ELC4123545 450A Eliminator torch (fits Viking adaptor)
10-6021 Work lead (3m)
10-6120 Feed roll, 0.6/0.8 Hard Wire
10-6151 Feed roll, 0.9/1.2 Hard Wire
10-6121 Feed roll, 1.0/1.2 Hard Wire
10-6179 Feed roll, 0.8/0.9 Soft Wire
10-6134 Feed roll, 1.0/1.2 Soft Wire
10-6180 Feed roll, 0.8/0.9 Flux cored
10-6022 Feed roll, 1.0/1.2 - 1.4/1.6 Flux cored
ELC94L Eliminator Mig Torch trigger lock
4. INSTALLATION RECOMMENDATIONS
4.1 Environment
The
Viking
s are NOT designed for use in environments with increased hazard of electric shock.
a) Examples of environments with increased hazard of electric shock are -
i)
In locations in which freedom of movement is restricted, so that the operator is
forced to perform the work in a cramped (kneeling, sitting or lying) position with
physical contact with conductive parts;
ii) In locations which are fully or partially limited by conductive elements, and in
which there is a high risk of unavoidable or accidental contact by the operator, or
iii) In wet or damp hot locations where humidity or perspiration considerable reduces
the skin resistance of the human body and the insulation properties of accessories.
b) Environments with increased hazard of electric shock do not include places where
electrically conductive parts in the near vicinity of the operator, which can cause increased
hazard, have been insulated.
4.2 Location
Be sure to locate the Power Source according to the following guidelines:
a) In areas, free from moisture and dust.
b) Ambient temperature 0
°
C to 40
°
C, (32
°
F to 104
°
F)
c) In areas, free from oil, steam and corrosive gases.
d) In areas, not subjected to abnormal vibration or shock.
e) In areas, not exposed to direct sunlight or rain.
f) Place at a distance of 30cm (1ft)or more from walls or similar that could restrict natural air
flow for cooling.
g) The minimum ground clearance for these products is 140mm (5.5in)