Thermal Arc 180 AC, Руководство пользователя

Страница: 18 / 36

Notice NOT 034
THERMAL ARC 180 AC/DC
Rev : 00
Date : 03/12/02
USING
USER’S MANUAL
Page
1 8/36
IMPORTANT : using the potentiometer of the remote control, you can adjust the welding current
from 3A to the current selected with the main potentiometer F9 of the power source. This value is
displayed on F5 when the potentiometer of the remote control is on “maximum”.
This allows you to set the welding current with fine adjustment directly on the remote control
Reading the parameters when welding
When welding, digital display F5 shows welding current in Amps measured by the machine.
It is possible to read the welding voltage when pressing the setting key F6 . The value is displayed in
Volts (indicator F18 goes out and F19 illuminates). Press setting key F6 in order to display current’s
value again.
Ventilation in MMA (stick) welding
Fan allows the cooling of electronic components.
Ventilation is permanent.
Fan speed changes according to the components’ temperature.
This method is a good solution between cooling and protection from dust circulation in the machine.
12. TIG WELDING
12.1. 2 STROKE & 4 STROKE MODE
2 STROKE MODE