English 6
Figure 2:
Side View
Combustible
Materials
27 ¼” (692mm)
10
¾
”
(273mm)
High Shelf
30” Low Back Guard
Back Wall
Front Face
23”
(584mm)
Max
36 ¾”
Min
35 ”
(933mm)
(911mm)
22”
(559mm)
9”
(229mm)
6”
(152mm)
24 ”
(625mm)
24” max.
(606mm)
(629mm)
24 ¾”
27 ” (702mm)
36” & 48” Low Back Guard
2 ¼”
(57mm)
Cantilever
36” (914 mm)
min. to
combustibles
Max
36 ¾”
(933mm)
(911mm)
Min
35 ”
Combustible
Front Face
Flush Island Trim
13
/
16
” (21mm) height
Note
: If an inner wall is
used under the cantilever
counter top, there should
be a
” (3mm) gap from
the rear of the range to the
inner wall.
Note
: For Flush Island
Trim installations,
counter surface should
have a cantilever edge
meeting the back section
of the Flush Island Trim
accessory.
12” (305mm) min
to combustible
surface with Flush
Island Trim
Note:
With the oven door fully open, the top of the
door extends to 44 ” (1140mm) from the
back wall, behind the range when installed.
Installation must allow ample clearance for
movement around the door when fully
opened.
as defined in the “National Fuel Gas
Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials
are not part of the ANSI Z21.1 scope and are
not certified by CSA. Clearances of less than
12” (305 mm) must be approved by the local
codes and/or by the local authority having
jurisdiction.
Installation with Flush Island Trim
36” (914mm)
min. to
combustibles
Materials
Installation with Low Back or High Shelf