Thermador DWHD860RFM, Инструкция по использованию и уходу

Страница: 12 / 84

12
Water softening system / special salt
To ensure good rinsing results, the dishwasher requires
soft water, i.e. water which is low in lime, otherwise
limescale will be deposited on the utensils and interior
container. Tap water above 7° dH (1.2 mmol/l) must be
softened. The water is softened with special salt
(regeneration salt) in the water softening system
of the dishwasher. The setting and therefore the required
amount of salt depends on the degree of hardness of
your tap water (see following water hardness table).
Water hardness table
Using a water hardness test strip
The strip will be included in the detergent sample kit.
Sample test strip
Adjusting the water softening system
The amount of salt dispensed can be set from
0
to
62
°E.
Salt is not required at the set value
0-8
.
Set the softening system as follows:
1.
Ask your local water utility company for the water
hardness value of the tap water.
2.
Required setting can be found in the water hardness
table.
3.
Open the door.
4.
Switch on ON/OFF switch ( .
5.
Press Info button
( 8
for 3 seconds until the
following text is indicated on the display window at the
top
@
:
Scroll with < >
Set with
- +
Leave with
t
3 sec.
6.
Keep pressing button
> )*
until the water hardness
is indicated on the display window at the top @ .
7.
Make the selection with setting buttons
+ - X
.
8.
Press and hold the Info button ( 8 for 3 seconds.
The chosen setting has now been stored.
Using special salt
As soon as the low salt indicator
P
lights up on the
digital display, salt should be topped off. Always refill with
special salt immediately before switching on the
appliance. This ensures that overrun special salt solution
is immediately washed out and does not corrode
the rinsing tank.
NOTICE:
Detergent will destroy the water softening
system! Never pour detergent into the salt dispenser.
Top off the salt as follows:
1.
Undo the screw plug on the dispenser
1Z
.
2.
Fill the dispenser with water (required only when
switching on the appliance for the first time).
3.
Add salt as illustrated
(do not use table salt or
tablets)
.
The water is displaced and runs out.
For more information about buying dishwasher salt,
please contact customer service (1-800-944-2904).
Using detergents with salt component
Detergent with a salt component
If combined detergents with a salt component are used,
special salt can usually be omitted up to a water
hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l). If
the water hardness is over 21° dH, salt must be used.
:DWHU
KDUGQHVV
YDOXHƒ(
VRIW
PHGLXP
KDUG
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
PPROO
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
6HWYDOXH
RQWKH
PDFKLQH
+DUGQHVV
UDQJH
KDUG
KDUG
PHGLXP
PHGLXP
VRIW
*