Thermador CET366FS, Инструкция по использованию и уходу

Страница: 11 / 76

10
The Elements
Residual heat indicator
The cooktop is equipped with a residual heat indicator
for each element. It shows you which elements are still
hot. Avoid touching the indicated elements.
If an
•
is shown on the display, the element is still hot.
You could use it, for example, to keep a small quantity of
food warm or to melt a chocolate coating. As the element
continues to cool, the display changes to
œ
. The display
goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on
after a power failure. The display lights up for
approximately 30 minutes.
Operation
Main power switch
Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the ON/OFF key until the
"
indicator turns on.
Turning the cooktop off
Touch the ON/OFF key until the
"
turns off. The residual
heat indicators will remain on until the elements have
cooled off sufficiently.
Note:
The cooktop switches off automatically when all
the elements have been switched off for more than
20 seconds.
The residual heat indicator remains lit until the elements
have cooled down sufficiently.
•
/
œ
is displayed next to
the corresponding element symbol.
Setting the cooktop
This section will show you how to set the elements. The
table contains details on the heat settings for a variety of
dishes.
Setting the element
Select the desired heat level using the number
keys 1 to 9.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat setting has an intermediate level. This level is
indicated by .
†
and is set using
@
and
A
.
Element Turning on and off
$
Single element Single elements have only one size cooking surface. Always use cook-
ware of a suitable size.
ð
Dual element The size of these elements can be matched to your pan size. The heat-
ing element must be turned on.
Turning off the outer heating ring:
Touch
PAN SIZE
. The
ð
display
will turn off.
Adding: Touch PAN SIZE again. The
ð
display will turn on.
ò
Triple element On this element you can turn the medium and large heating rings off.
The heating element must be turned on.
Turning off the outer heating ring:
Touch
PAN SIZE
. The
ò
display
will turn off.
Turning off the middle heating ring: Touch PAN SIZE again. The
ð
display will turn off.
When you turn the heating element on again, all of the heating rings
will be on.