Art. no.: A003-928_Rev 01
Last edited: CW40/2014
15
FEEDBACK SENSOR INCL. TOUCH KEY
USER MANUAL
Charging the battery:
►
Remove the
feedback sensor incl. touch key from the sensor holder.
►
Switch off the
feedback sensor incl. touch key before charging (see chapter
8.2).
► Ensure that the feedback sensor incl. touch key is switched off while
charging.
► Plug the charging cable into the charging socket in the feedback sensor incl.
touch key.
► Insert the USB plug of the USB charging cable into a free USB interface.
OR
► Insert the USB plug of the USB charging cable in the USB interface of the
USB charger for the feedback sensor.
► Insert the plug of the USB charger for the feedback sensor into the socket.
The USB charging cable and USB charger for the feedback sensor available
optionally from the manufacturer are not a medical-device USB charging cable and
USB charger.
Charging must take place outside a 1.5-metre radius of the direct
surrounding of the patient.
Charging process begins.
The LED of the charge/activation status indicator shows the status of the
charging process.
LED flashes green:
Battery charging.
LED lights green:
Battery is fully charged.
During the charging phase of the battery, the feedback sensor incl. touch key is
inoperable and therefore cannot be used for training.
Batteries are leak-proof if handled and stored correctly.
► Store the battery in a cool place if not used for an extended period.
► Have batteries replaced exclusively by a trained dealer.
► To have batteries replaced, contact a trained dealer.
When batteries are replaced by a trained dealer, dispose of them in accordance
with national regulations.
The battery warranty is subject to legal regulations:
24 months
- 6 months full warranty
- 18 months with reversal of burden of proof
Note
Note
Storage
Replacing the
battery
Disposal
Warranty
