Art. no.: A003-928_Rev 01
Last edited: CW40/2014
11
FEEDBACK SENSOR INCL. TOUCH KEY
USER MANUAL
7 STARTUP
To use the feedback sensor incl. touch key for the first time, remove it from
its packaging and check for damage caused in transit.
Check if delivery is complete.
Report any damage to the supplier or carrier without delay.
Before using the equipment for the first time, charge the battery for at least 6
hours.
7.1 Fixing the feedback sensor to the THERA-Trainer balo
Fix the feedback sensor incl. touch key to a THERA-Trainer balo using the
feedback sensor mounting kit for the THERA-Trainer balo. To fix it, follow the
instructions below:
► Mount the sensor holder
1
to the system bracket
3
with two bolts
2
, using a
suitable tool.
-
Fix the sensor holder on the system bracket using the correct orientation
(wider side facing left).
-
Insert two bolts through the holes and secure each one with a nut.
► Bolt the system bracket
3
to the swivel plate under the table unit of the
THERA-Trainer balo (left-hand side)
5
with a suitable tool using two bolts
4
.
► Clip the feedback sensor incl. touch key
6
into the sensor holder
1
.
-
Ensure that the sensor orientation arrows
7
point forward and upward.
1
2
3
4
4
5
4
1
3
6
7
1
2
3
4
4
